Attaching a pendant raises two questions that no product photo can answer: will the bail grip this hole, and will it carry this weight? This index answers both for one live finding at a time, starting with the copper zircon V-shaped pinch bail. It is written for buyers who compare copper jewelry findings against brass and steel before placing a lot order, and for makers who keep a working stock of copper findings for jewelry making across repair jobs and new assemblies. Every table below either states what the seller publishes or tells you exactly what to measure before you commit.
Three measurements decide almost every bail order. Work through them before you open the variant selector.
Measure the widest point of the hole, loop or drilled channel with calipers and record the figure rather than estimating from a photo. Note the shape too, because a V-shaped pinch bail seats differently on a round loop than on an oval or teardrop opening.
Weigh the complete drop with its bezel, stone and any jump ring attached. VNISTAR states this pinch bail suits light to medium weight pendants, so an accurate gram figure decides whether you stay with this finding or step up to a screw or soldered type.
Match the clip opening to the hole profile, then read the weight band table to confirm the attachment method. Finally choose the variant code and pack, and confirm the price shown at checkout.
Read across one row at a time: hole profile, weight band, the finding that fits, and what to measure before you buy. Cells left as confirm steps stay open because the product page publishes no hole size, gauge or gram limit.
| Pendant hole profile | Weight band | Finding that fits | Measure before ordering |
|---|---|---|---|
| Round hole, small opening | Light | V-shaped pinch bail with zircon accent — closes by hand, no tool needed | Compare the hole diameter with the clip opening on the variant you select. A round hole lets the clip pivot, so check whether a jump ring is needed to stop rotation. |
| Round hole, wider opening | Light to medium | Same pinch bail if the clip closes onto the pendant edge without forcing | Hole diameter plus pendant thickness where the clip closes. If it only grazes the rim, use a jump ring adapter instead of squeezing harder. |
| Oval or teardrop hole | Light to medium | Pinch bail plus a small jump ring to stabilise the hanging angle | The narrowest span of the opening. A clip on the widest point slides and tilts the pendant; seat it on the narrow end and recheck the hang. |
| Irregular or hand-drilled hole | Light | Pinch bail with a jump ring, or a screw-type finding if the rim is uneven | The smallest span across the opening, and inspect the rim for burrs. A rough edge stops the clip closing flush, so smooth it before attaching. |
| Smooth drilled hole, solid drop | Medium — the published limit of this bail | V-shaped pinch bail, used at the top of its stated light-to-medium range | Finished pendant weight in grams, and the grip after a firm press. Test one bail from the lot before the full run. |
| Heavy plate or stone-set drop | Above the published range | Not this pinch bail — choose a screw, snap or soldered finding | Weigh the finished drop first: hand-closed clips are not right for a heavy pendant, however well the hole fits. |
| Chain pairing and finish match | Any within the published range | This bail is stated as compatible with copper chains for a consistent look | The internal gap of the chain end link and the bail's top loop. No chain gauge is published, so compare both with calipers before buying matching lots. |
Two columns cannot be filled from the seller's page: chain gauge and hole size. Treat them as measurement tasks, and confirm with your own caliper readings on large orders.
Weight, not hole shape, decides whether a clip can be closed by hand. Read the bands from top to bottom: the further down you go, the more the attachment changes.
| Band | Typical pendant | Attachment | Where failure shows up |
|---|---|---|---|
| Light | A single small charm, a thin stamped pendant, or a short bead drop | Tool-free: the V-shaped pinch bail closes by hand | The clip loosens slowly rather than releasing suddenly, so a grip check before shipping catches it early |
| Medium | A solid pendant, a stone-set drop, or a small cluster of charms | Tool-free with a firm press; verify the grip on one piece first | The hinge or inner edge of the clip after repeated rotation, especially on a long chain |
| Heavy | Large metal plates, stacked pendants, or heavy gemstone drops | Tool-required: screw, snap or soldered fittings | Deformation of the clip and a dropped pendant — outside the published light-to-medium range |
No gram limit is published. Treat light to medium as a qualitative band, weigh your own assembled pendant, and test the grip on one bail from the lot before attaching the rest of an order.
Four common mismatches between a clip and a pendant opening: the symptom, the usual cause, and the fix that keeps the pendant hanging straight.
Everything below comes from the live product page. Fields the seller does not publish are marked confirm-on-request rather than filled with estimates.
| Product | 10pcs/Lot Fashion Copper Zircon V Shaped Pinch Bail Clasps Melon Seeds Clips For DIY Necklace Pendant Women Jewelry |
|---|---|
| Material | Copper with zircon stone accents |
| Shape | V shaped pinch bail / melon seed inspired clip |
| Attachment | Tool-free: the clip is pressed closed by hand during pendant assembly |
| Published capacity | Light to medium weight pendants |
| Chain pairing | Stated as compatible with copper chains for a consistent finish |
| Applications | New assembly and jewelry repair, including replacement of worn or broken clasps |
| Variants | YF1059-1x10, YF1059-2x10, YF1060-1x10, YF1060-2x10 |
| Lot quantity | 10 pieces per lot per the title and description; the selector also shows a pack reference — confirm the quantity shown in your cart |
| Price shown | $2.50 per pack (listed against a struck-through $20.00); USD, EUR and GBP currency options |
| Custom orders | Available by direct contact, including OEM/ODM requirements and custom designs or sizes |
| Not published | Weight, dimensions, gauge, plating thickness and stone count — measure and confirm before a bulk order |
Four codes appear in the selector, and each lot holds 10 pieces, so you can sample every code before a larger reorder.
Sample one lot for the first build and check the grip against the pendants you already stock.
Use as the second reference in a comparison run when your pendant hole sizes vary between designs.
Order alongside YF1059 codes if you want both styles available in the same repair kit.
Scale this code first once sell-through confirms which bail your customers reorder most.
The same 10-piece lot serves very different buyers. Find your situation, read the product fact, and take the action it points to.
Product factThe finding is described for jewelry repair as well as new assembly, with tool-free installation.
Your decisionMeasure the customer's pendant hole before choosing, keep one lot as bench stock, and match the replacement finish to copper chains.
Product factCopper body with a zircon stone accent, stated as compatible with copper chains.
Your decisionKeep the bail, chain and pendant in the same metal family so the necklace reads as one piece.
Product factFour variant codes with a 10-piece lot and a clear SKU system for inventory.
Your decisionBuy one lot per code, track which sells through, then move the winner into a larger reorder instead of stocking all four deep.
Product factPublished capacity is light to medium weight pendants, closed by hand.
Your decisionCheck the hole size of every pendant style before pairing, and reserve screw-type findings for anything above the published weight band.
Product factCustom orders are offered by direct contact, including OEM/ODM requirements and custom designs or sizes.
Your decisionPrepare your design, size and packing requirements with a target quantity so the quotation can be scoped in one exchange.
Product factThe bail is copper with a zircon accent and is priced per pack with USD, EUR and GBP options.
Your decisionOrder one sample lot first, test the grip and finish against your existing stock, then move to bulk pricing.
Larger quantities, mixed variant lots and custom designs are handled by direct contact, not the standard cart. Send your requirements with the measurements from this index for a scoped reply.
Keep adjacent product options together for a faster catalog comparison.
Durable stainless steel enamel charms add vibrant style to DIY bracelets and necklaces. Perfect for crafting personalized accessories with jewelry charms wholesale and bracelet charms.
View product
6pcs/pack Stainless Steel Waterdroop Evil Eye DIY Charm Knot Hand Bag Necklace Pendant Women Love Heart Jewelry Wholesale,Diy Steel Charms,Diy Jewelry Charms
View product
6pcs/pack Stainless Steel Crescent Moon Sun DIY Charms Hollow Flower Necklace Pendants Women Swirl Circle Jewelry Wholesale,Diy Steel Charms,Diy Jewelry Charms
View productthe product page states copper accented with zircon stones, described as combining metal durability with decorative sparkle. coordinates include a melon seed-inspired v shaped clip. plating thickness and metal gauge are not published on the page.
the title and description state 10 pieces per lot. the variant selector also shows a pack reference, so confirm the quantity displayed in your cart before checking out.
no. vnistar describes installation as simple and tool-free, with the clip pressed closed by hand. test the grip on one bail before closing a full production run of pendants.
the page states the bail suits light to medium weight pendants and does not publish a gram limit. weigh your finished pendant and test one piece from the lot to set your own threshold before ordering in bulk.
no hole size is published, so measure the opening with calipers and compare it against the clip on the variant you select. round, oval, teardrop and irregular openings each need a different seating position, and a jump ring can bridge a poor match.
yes. custom orders are offered by direct contact, including oem/odm requirements and custom designs or sizes. email sale10@vnistar.com or use the contact page with your variant codes, quantities and requirements.
